Lincoln Electric Stick Electrode Welding C2.410 - Manual (Page 34)

-34-
Horizontal Fillet W
elds
(1) First pass only. On later passes, adjust arc speed to obtain proper bead size.
(2) Total for all passes. 100% operating factor.
Note: E7018 can produce code quality welds. E7018 procedures are used when E7028 is not available and for
electrodes E8018 and E11018.
No. of Passes 1 1 1 1 2 3 4 5
Leg Size – L (in.) 5/32 3/16 1/4 5/16 3/8 1/2 5/8 3/4
Electrode/AWS Class Jet LH-78MR, Jetweld LH-70, Excalibur 7018, Excalibur 7018-1
Diameter (in.) 3/16 7/32 7/32 1/4 1/4 1/4 1/4 1/4
Current (Amps) 240 275 275 350 350 350 350 350
Polarity AC AC AC AC AC AC AC AC
Arc Speed In./Min. (1) 13 11.5 9 7 9 10 8 7.5
Ft. of Weld/Hr. (2) 65 58 45 35 26 17 11 7.5
Lbs. of Elec./Ft. of .111 .140 .203 .335 .480 .785 1.18 1.62
With E7018 Electrode
L
L