La Crosse Technology Wireless 433 MHz Temperature Station WS-9014U - Manual (Page 17)

17
both units in their desired location before
permanently mounting.
A. REMOTE TEMPERATURE
SENSOR
1. Remove the mounting bracket from
the remote temperature sensor
2. Mount using either screws or
adhesive tape.
3. Reattach the remote temperature
sensor to the mounting bracket.
B. THE TEMPERATURE STATION
1. The indoor temperature station comes
with the table stand already mounted.
If you wish to use the table-stand, all
that is required is to place the indoor
temperature station in an appropriate
location.
2. To wall mount, remove the table
stand. To do this, pull down on the
stand from the rear and rotate forward.
a) Fix a screw (not included) into the
desired wall, and place the indoor