Linksys AE1000 - Manual (Page 5)

Linksys AE1000 Chapter 2: Installation
3 High Performance Wireless-N USB Adapter
6 A list of available wireless networks appears Select
your network Click Next
Connect to a Wireless Network
7 If your network does not use wireless security, go to
step 9
If your network uses wireless security, enter the
wireless password for your type of security:
• Wired Equivalent Privacy (WEP): Enter the WEP key
• Wi-Fi Protected Access (WPA/WPA2): Enter the
passphrase (also known as a pre-shared key)
Click Next Go to step 9
Enter the Wireless Password
8 Follow the on-screen prompts to use your Easy Setup
Key Click Next
Insert your Easy Setup Key
9 The installation is complete Click Close
You are Now Connected to Your Wireless Network
NOTE: If you have any problems during the
installation process, refer to the Frequently
Asked Questions in the setup software, or use a
computer with an active Internet connection to
visit www.linksys.com/support