Lucent Technologies CellPipe 22A Series - Manual (Page 2)

To learn more about our comprehensive
portfolio, please contact your Lucent
Technologies Sales Representative or
Lucent Business Partner, or visit our web
site at www.lucent.com.
This document is provided for planning
purposes only, and does not create,
modify or supplement any warranties
which may be made by Lucent
Technologies relating to the products
and/or services described herein. The
publication of information contained in
this document does not imply freedom
from patent or other protective rights of
Lucent Technologies or third parties.
CellPipe is a registered trademark of
Lucent Technologies Inc.
Copyright © 2003
Lucent Technologies Inc.
All rights reserved
CELL v2.0303
Specifications
Software Specifications
1.ATM/ADSL
G.DMT, T1.413 i2 /Fast and Interleaved
Trellis Code
AAL5
UBR/GFR
CBR
VBR
Multiple VCs Support
UNI 3.1/4.0, SVC
OAM F4/F5 Loopback
2.Bridging/Routing
802.1d Transparent, Learning Bridge
Spanning Tree (STP)
RFC 2684 – Bridged
RFC 2684 – Routed
PPPoE
PPPoA
IPoA
IPv4, TCP, UDP, ICMP, ARP
RAPR as per RFC 0903
Virtual IP Interface
IP Routing – RIP v1 and v2
Static Routing
DHCP Server/Client/Proxy
DNS Proxy
IP Multicast, IGMP Proxy
3.Security
NAT
PPP with PAP/CHAP
Raw/IP Filtering
SPI
VPN: L2TP/PPTP Pass Through
DoS
ID/Password Authentication
4.Management
SNMP v1 and MIB II (RFC 1213)
HTTP Server
Auto VCI/VPI Detect
Command Line Interface
FTP, TFTP
TELNET
ZIPB (Zero Installation PPP Bridge Mode)
Surfing Profile
Layer 2 Management Protocol
(without IP)
LEDs
TR-37
Dying Gasp
5.Host USB Drivers (22A-GX)
Windows 98SE, 2000, ME, XP
Concurrent USB and Ethernet
Hardware Specifications
1.Dimensions
7.1 in x 5.7 in (18 cm x 14.5 cm)
2.Weight
11 ounces (300 grams)
3.LAN Interface
22A-GX / 22A-BX: 1 USB port and
1 10/100 Ethernet Port
22A-EX / 22A-FX: 4 port 10/100
Ethernet Switch
4.Operating Environment
Temperature: 32 – 120°F (0° – 50°C)
Humidity: 5 – 95% non-condensing
5.Power Requirement
AC Voltage: 100 – 120 VAC,
200 – 240 VAC
Frequency: 50/60 Hz
Power Consumption: 15 W maximum
6.Safety Compliance
UL 1950, CSA C22.2, EN60950
7.EMC/RFI Compliance
FCC Part 15 Class B, EN55022/CISPR
22 Class B, EN50082-1, CE, VCCI
8.WAN Interface
One ADSL interface (RJ-11 jack for annex
A models, RJ 45 for annex B models)
9.Line Impedance
100 ohms
10.Line Code
DMT
11.Compliance
ANSI T1E1.413 issue 2, ITU-T G.DMT
(G.992.1 annex A or annex B), G.Lite
(ITU G.992.2)
12.Line Speed
Full Rate (G.DMT): 8 Mbps downstream,
1 Mbps upstream
G.Lite: 1.5 Mbps downstream,
512 Kbps upstream
13.Analog Line Support
Supports the use of an external splitter