Lanzar Car Audio SDBT75NU - Manual (Page 18)

OPERATION
19
A: Expert menu
In expert menu, the following operation
will be allowed:
- Use
/ to select Beep on or off.
- Use / to turn the Clock display on
or off.
Note: With the expert menu on, when
select clock on, the current time will be
displayed on the up right of the screen,
and you can see the time is changing.
When exit the expert menu the clock
will be displayed on the up right of the
screen.
When select clock off, the current clock
will be stopped, when you exit the
expert menu, the clock display will be
turned off.
- Use
/
to turn the Zone on or off.
(only in radio mode, you can change
Zone to ON.)
- Use / to select the mode of time
between 12H/24H per day.
B: Dual Zone
For the front speaker, use
/
to select
corresponding items.
How to operate dual zone, please refer
to the following Smart Mode Operation
section.
C: Clock adjustment
Using
/
to select the hour and minute.
Then using
/
to change the value of
the hour and minute.
Note: Tap the Reset bar on the screen will
reset the time to “00:00”.
D: Wallpaper selection
Use / to select the wallpaper among:
Blue, Black and Cyan.
3) DVD SETUP
Please refer to the DISC (DVD, VCD, CD,
MP3) OPERATION part in this instruction
manual.
4) DEFAULT
Tap the DEFAULT bar on the SETUP menu,
you will be asked “Are you sure to load
factory default setting?”, if you want to
select default setting, tap ENTER bar on
the screen or press OK
button on the remote control to confirm,
and “Load factory ok ! ” will appear on
the screen.
Note (FOR THE UNIT WITH TEL-
MUTE AND BRAKE FUNCTION)
1) When there is an incoming call, the unit
will be in mute state, and “TEL MUTE”
appears on the screen display.
2) If the brake wire isn’t connected to the
ground (when driving, in BRAKE OFF),
the picture will not be shown on the
screen in DVD/AV mode for safety
purpose. Only the audio will be heard.
Smart Mode Operation
Shortly press S-M button on the remote
control or S (Smart MODE) button on the
front panel to enter Smart Mode.
1) When the current mode is TUNER,BT
press S-M or S to enter smart mode,
the front zone mode is TUNER, the rear
zone mode can be switched among
MEDIA, AV1 IN and AV2 IN. In this time,
the front speaker’s audio is RADIO, the
rear speaker’s audio will be muted. And
AV OUT is DVD, AV1 IN or AV2 IN.
2) (Only for the unit with navigation
function.)
When the current mode is NAVI, Press
S-M or S to enter smart mode, the front
zone mode is NAVI, the rear zone mode
can be switched between TUNER and
DVD. In this time, if there is no
navigation sound, the front/rear