Lightolier Alter QVS2GPFOS332 - Manual (Page 2)

Ordering Information Explanation of Catalog Number Example: QVS2GPFOS33212003
FIXTURE
WIDTH:
2’
CEILING TYPE:
Standard
exposed
T-grid ceilings
LAMP SHIELD:
PF = Microperforated
SD = Solid
LAMP
QUANTITY
LAMP/FIXTURE
LENGTH:
(NOMINAL 48”)
32 = 32W T8
VOLTAGE:
120V
277V
347V
BALLAST:
OC = Magnetic T8
03 = Electronic T8 instant start 3LPB*
R3 =Electronic rapid start, 3LPB*
PS =PowerSpec HDF Dimming T8
(Not available in 347V.)
*LBP : Lamp per ballast
OPTIONS:
R =Radio Interference Filter
O =Emergency Lighting System
(for Canada)
N =Emergency Lighting System
(for U.S.)
SPECIFICATIONS
MATERIALS: One piece chassis constructed from die formed
20 gauge cold rolled steel. Reflectors - 95% reflectance baked white acrylic matte
paint finish. Specular interior reflector. Soft white acrylic film on inside of lamp
shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic matte
high reflectance paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast. If K.Os are
within 3” of ballast use wire suitable for at least 90C.
Photometry
2 G 3 40
QUALITY
VISUAL
STATIC
Recessed direct
indirect soft
light optical
system
QVS
CLEAR POLISHED
ACRYLIC DROP
DOWN VISUAL
ELEMENT:
OS = Open slot (no acrylic)
OP = One Piece (no center slot)
GC = Clear acrylic
GG = Clear acrylic / Green projected color face
GB = Clear acrylic / Blue projected color face
GR = Clear acrylic / Red projected color face
ALTER SOFT LIGHTS
QVS2GPFOS332
Page 2 of 2 2’ X 4’ RECESSED DIRECT/INDIRECT FLUORESCENT 3 LAMP, T8,
5 1/2” DEEP MICROPERFORATED MESH LAMP SHIELD, STATIC
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902
Section 5 / Folio L30-20
Job Information Type:
LABELS: Listed by