Lincoln Electric BULLDOG IM10074 - Manual (Page 13)

A-6 INSTALLATION
BULLDOG™ 5500
A-6
PREMISES WIRING
The BULLDOG™ 5500 is not recommended for
premises wiring.
The BULLDOG™ 5500 does not have a combined
120/240 volt receptacle and cannot be connected to a
premises as described in other Lincoln literature.
Remember that the BULLDOG™ 5500 is intended
only for backup, intermittent use power.
Certain electrical devices cannot be powered by the
BULLDOG™ 5500. Refer to Table A.2 for these
devices.
CIRCUIT BREAKERS
Auxiliary power is protected by circuit breakers. When
the machine is operated in high temperature environ-
ments, the breakers may tend to trip at lower loads
than normally.
Never bypass the circuit breakers. Without over-
load protection, the BULLDOG™ 5500 could over-
heat and/or cause damage to the equipment being
used.
------------------------------------------------------------------------
CAUTION