Lopi WILMINGTON DVS FACE 99500146 - Manual

Wilmington DVS Face
Black 99500146 Carbon Patina 95100238
Page 1 of 2 17601434 5/13/13 © Travis Industries, Inc.
Compatibility:
• DVS Insert
• DVS Fireplace
Packing List:
• Face
• (2) Mounting Brackets
• (4) 10-24 x 1/2” Thread-Cutting Screws
• Patina Touch-Up Kit (Patina Faces Only)
Hand-Rubbed Patina Finishes
The optional patina finish is hand applied by a skilled artisan to permanently alter the metal colors and texture
of the face. Each face is individually hand-polished and fired in an oven which imparts unique color subtleties
with no two finishes alike. The patina finish on your face is a “living” color and will age and antique over time.
Enjoy the timeless, rich luster of your beautiful new face.
Installation
WARNING: Turn off gas to the appliance
and make sure it has fully cooled prior to
service.
1 Remove the glass (see the owner’s
manual). On inserts, install the
surround panels.
2 Install the mounting brackets following
the directions to the right.
3 Start the pilot (make sure the main
burner is off), and replace the glass
(see the owner’s manual). Install the
cove covers (see the illustration
below).
Attach the mounting brackets to
the heater with the included
screws.
HINT
: pre-thread the holes on the
heater before installing the
brackets.
COVE COVERS - DVS FIREPLACE
The cove cover to prevent light from
exiting the grill. It is included with
m
ost DVS Fireplaces or can be ordered
separately (SKU 250-00045). The cove
cover replaces the existing upper glass clip.
COVE COVERS - DVS INSERT
The cove covers prevent light from exiting
the grill. The DVS Insert includes cove
covers. Place them over the glass frame
prior to installing the face.