User manual, Web support, Snmp support – Liebert OpenComms Web Card User Manual
Page 2: Liebert opencomms nform support, Liebert multilink, Support
Technical Support/Service
Web Site
www.liebert.com
Monitoring
800-222-5877
Outside the US: 614-841-6755
Locations
United States
1050 Dearborn Drive
P.O. Box 29186
Columbus, OH 43229
Locations
Europe
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco (PD) Italy
+39 049 9719 111
Fax: +39 049 5841 257
Asia
7/F, Dah Sing Financial Centre
108 Gloucester Road, Wanchai
Hong Kong
852 25722201
Fax: 852 28029250
SL-52600_REV07_04-08
User Manual
This Quick Start Guide is designed to give you the information you
need to install and configure the Liebert Intellislot Web Card. A full
user manual, SL-52615, is available on
.
Liebert highly recommends that new users consult the user manual.
Web Support
The
Intellislot Web Card delivers
Web management and control to
Liebert equipment. All users on
your network will be able to view
status information. Control and
configuration capabilities are
protected by a username and
password combination. The
default username is “Liebert”
and the default password is also
“Liebert.”
You can change the password
from the Web or from the service
terminal.
WARNING: Change the
username and password today to
prevent unauthorized access.
SNMP Support
The Liebert Intellislot Web Card
enables SNMP management of
Liebert equipment. To integrate
the card into your SNMP
implementation, you will need to
compile the Liebert Global
Products MIB on your network
management station (NMS).
The Liebert Global Products MIB
is included in this package on
CD-ROM and supports both
Windows and Unix file formats.
Liebert OpenComms Nform
Support
Utilizing the SNMP and Web
technologies built into each of
the Intellislot Web cards, Liebert
OpenComms Nform will
centrally manage alarm
notifications to provide you with
an easy interface to access
critical system information.
A downloadable edition is
available online
.
Liebert MultiLink
™
Support
The Liebert Intellislot Web Card
installed in a UPS may be used
with Liebert MultiLink software,
providing unattended, graceful
operating system shutdown. The
card can be monitored by
MultiLink over the network,
eliminating the need for serial
cables.
Downloadable versions of
MultiLink and information about
MultiLink are available online at