Linksys WIP330 - Manual (Page 51)

Wireless-G IP Phone
43 Chapter 4: Configuring the Wireless-G IP Phone
Settings of the Wireless-G IP Phone
User Name. To add or change the User Name, select Edit. Enter the new User Name in the new
window. Select Save to save the new setting, or select Clear to delete a character or number on-
screen.
Password. To add or change the Password, select Edit. Enter the new Password in the new
window. Select Save to save the new setting, or select Clear to delete a character or number on-
screen.
DNS Server. To add or change the IP address of the DNS Server, select Edit. Enter the new DNS
Server IP address in the new window. Select Save to save the new setting, or select Clear to
delete a number on-screen.
Payload Type. G.711a, G.729, and G.7111u are the three Payload Types available. They are listed in
order of preference. To change the order of preference, select Edit until the appropriate order of
preference is displayed on-screen.
Packet Time. You have two Packet Time lengths available, Small and Large. To change the time
period, select Edit until the appropriate Packet Time is displayed on-screen.
DTMF Relay. You can enable or disable the DTMF Relay feature. To enable or disable the feature,
select Edit.
UDP Port. To add or change the UDP Port number, select Edit. Enter the new UDP Port number in
the new window. Select Save to save the new setting, or select Clear to delete a number on-
screen.
RTP Port. To add or change the RTP Port number, select Edit. Enter the new RTP Port number in
the new window. Select Save to save the new setting, or select Clear to delete a number on-
screen.
Figure 4-66: Save User
Name
Figure 4-67: Save
Password
Figure 4-68: Save DNS
Server
Figure 4-69: Change
Payload Type