Linksys CallManager 7920 - Manual (Page 69)

Customizing Phone Settings and Viewing Phone Status
Cisco Wireless IP Phone 7920 for Cisco CallManager 63
Tips
• If you enable the Phone Lock feature and have
not changed the password, enter 12345 (default
password) to unlock the phone.
• If you change the Phone Lock password and
forget it, you must contact the system
administrator to have the phone unlocked and
reset. You will lose all your personal settings
including your Phone Book entries.
• Be aware that restoring factory default settings
erases your Speed Dial, Call History, and
customized settings. The network settings are
changed to defaults so your phone cannot access
the network. Only Phone Book data is preserved.
• The system administrator uses the USB port only
for phone configuration. When the phone is
powered off, the USB port reverts to disabled.
Erase the local phone
configuration and reset
to factory default
settings Scroll to and select Factory
Default. The “Restore to
Default?” message displays.
Note All customized phone
settings will be erased
including network
settings.
Press OK to reset the phone
or Cancel to retain settings.
If you want to... Then...