Land Pride Skid Steer Rakes SR2672 - Manual

60
Powered Rakes
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
SR26 Series (Skid Steer)
SR2672 SR2690
Hydraulic Drive Requirements 11 GPM at 2200 psi minimum 15 GPM at 2500 psi minimum
Non-Angled Width 82 1/2” 100”
Angled Working Width 72 1/2" 90”
Non-Angled Length 72 1/2"
Overall Height 41 1/8” 41 1/8”
Machine Weight 930 lbs. 1200 lbs.
Direction of Travel Bi-directional
Material Control Blade 2 each - 1/2” x 5” Urethane
Spike Roller RPM 9 3/8” Dia. with 3/4” x 1 1/2” Carbide Tipped Studs
Roller Speed Variable from 180 - 260 RPM
Roller End Bearings Roller Bearings
Drive Chain #50 Double Continuous Roller Chain, High Tensile,
Enclosed in oil bath
Angle Adjustment Hydraulically controlled
18 degrees right and 22 degrees left
Angle Cylinder 2” X 8”
Depth Control 2 Each 16.5” x 6.5” Air Tires W/ sealant and 3/4” Roller bearings and Spacer height
adjustment
Skid Shoes Replaceable
Chain Case Lubrication 2 1/2 pints of 80-90 weight Gear Lube - Add gear lube until it escapes from lower plug
hole.
321-004S continue on next page 6/09/09