Listen Technologies DCN-MICS - Manual

D o n ' t m i s s a s i n g l e s o u n d .
DCN-NG Pluggable Microphone
updated 06.24.05 Listen ® and the Listen logo are registered trademarks of Listen Technologies Corporation
Features
• Unidirectional microphone
• Adjustable stem
• Combines high acoustic quality and good sensitivity with low sensitivity
• Built-in plop and windshield
• Slim and attractive design
• Fast and reliable connection is assured via the 6-pole connector
• Low susceptibility to cell phones
• 2 color mic ring indicator, red (mic on), green (request to speak)
L i s t e n Te c h n o l o g i e s C o r p o r a t i o n
8535 South 700 West, Suite A
Sandy, UT 84070-2515 U.S.A.
Phone: 1.801.233.8992 or 1.800.330.0891
Fax: 1.801.233.8995
Email: [email protected]
Specify Par t
Number
DCN-MICS
DCN-MICL
The DCN-MICS and DCN-MICL are unidirectional microphones
with an adjustable stem for use with DCN-IDESK-L Interpreter
desk, Concentus and flush mount units.
Specifications
Controls and Indicators
Using a clamp on floor or table stand. Red light emitting light ring around
the microphone head
Interconnection 6-pole connector
Performance
Sensitivity Nominal level at 85 dB SPL, max level 110 db SPL at < 3% THD
Frequency response 100 Hz – 16 kHz
Transducer type electret
Directional pattern cardiod
Equivalent noise level 24 dB (A)
SNR 60 dB
Physical characteristics
Stem length DCN-MICS 12.2 in. (310 mm), DCN-MICL 18.9 in. (480 mm)
Weight DCN-MICS 0.24 lbs. (110 g), DCN-MICL 0.28 lbs. (125 g)
Mounting 6-pole mini XLR connector
Color Silver
shown installed
in DCN-IDESK-D