Legacy Car Audio LDVD84 - Manual (Page 12)

12
Adjust volume level by using VOL+ (10) and VOL- (9) buttons.
Note: The unit is initially set to volume mode.
Press SEL button (8) one time. Adjust bass level by using VOL+(10) and VOL-(9)
buttons.
Press SEL button (8) two times. Adjust treble level by using VOL+(10) and VOL
-(9) buttons.
Press SEL button (8) three times. Adjust sound balance between left and right
speakers by using VOL+(10) and VOL-(9) buttons.
Press SEL button (8) four times. Adjust sound balance between front and rear
speakers by using VOL+(10) and VOL-(9) buttons.
Press MU button (4) to mute down sound. Press it again to release this mode and
recover previous volume level.
Press MOD button (12) to change between radio or disc mode.
Press EQ button (7) to turn to equalization function and to select desired audio
mode.
There are four kinds of mode as below:
The LCD can show the current state of the unit
Press button(16) or button(15)to the previous track or the following track .
Track number shows on the display.
Volume
Bass
Treble
Balance
Fader
MUTE
SELECT MODE
EQUALIZATION
LIQUID CRYSTAL DISPLAY
SKIP TRACKS
FLAT CLAS ROCK POP NO EQ