LST OH-13001 - Manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED OH-13001_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
• Addressable conventional technology
• Combination of optical and thermal
characteristics of fi re
• Individual detector addressing by
means of optional address module
• Optional connection of remote
indicator
• Sealed electronics
Description
The Optical-Thermal Detector OH-13001 uses both the
scattered light principle as well as a separate thermal
detection unit. It was developed to detect the characte-
ristics of fi re in a wide range of applications, and to avo-
id deceptive alarms. The modern design of both measu-
rement systems and the analysis of the parameters by
means of a special algorithm allow to reliably evaluate
the characteristics of fi re. This makes it an all-rounder
that is used in virtually all fi elds of fi re detection.
Intelligent evaluation algorithms compensate for the
contamination of the optical measurement system,
thus keeping the response sensitivity of the detector
constant for a long time. In this way, false alarms can
be avoided to a great extent. If the contamination can
not be compensated any further, or if a fault occurs in
the measurement system, this is indicated by a yellow
fl ashing of the multicoloured status LED.
Addressable conventional technology is used for alarm
transmission to the fi re detection control panel. By
means of the optional Address Module NG60-1, each
detector can be addressed individually, thus allowing to
display the detector address, as well as an assigned
element text, on a suitable fi re detection control panel.
The detector can be attached to various bases and it
can be protected against theft.
Specifi cations
Operating voltage Supply through the detector line voltage
Current consumption typ. 65µA (quiescent)
Ambient temperature - 40°C to +70°C (no condensation or icing)
Relative humidity 0 – 98% (no condensation)
Dimensions ш Ч H 100 × 42 (mm)
Colour white
Weight 80g
Approval VdS G204040
Order number 241061
Order name Optical-Thermal Detector/Conv./ORBIS/Apo OH-13001