La Crosse Technology WS-9057U - Manual

1
WIRELESS FORECAST STATION
Model WS-9057U-IT-LC| Quick Setup Guide
INSTANT TRANSMISSION is the state-of-
the-art new wireless transmission
technology, exclusively designed and
developed by LA CROSSE TECHNOLOGY.
INSTANT TRANSMISSION offers you an
immediate update (every 4 seconds!) of all
your outdoor data measured from the
transmitters: follow your climatic variations
in real-time! This product offers:
2
INVENTORY OF CONTENTS
1. Wireless Forecast Station
2. Thermo/hygro transmitter (TX29UDTH-IT)
3. Instruction manual
FEATURES:
The Wireless forecast station
Foldable
Stands
LCD
Display
Function Keys
Battery
Compartment
Wall Mount
3
x WWVB Radio controlled time with manual setting option
x Time reception ON/OFF (user selectable)
x 12/24 hour time display
x Time zone option ±12 hours
x Daylight saving time (DST On/Off)
x Weekday and day calendar display (year and month only in setting
mode)
x Alarm setting with snooze function
x Display 12 Moon phases throughout the year
x Weather forecasting with weather tendency indicator
x Indoor comfort indicator
x Temperature display in °F/°C
x Indoor and outdoor temperature display with MIN/MAX records and
time of reception
x Humidity data display as RH%
x Indoor and outdoor humidity display with MIN/MAX records
x Relative air pressure hPa/ inHg with adjustable reference value
x Weather icon sensitivity setting
x Relative air pressure history for the past 24 hours (electronic
barometer with barometric pressure trend)
4
x LCD contrast selectable
x Can receive up to 3 outdoor transmitters
x
Wireless transmission at 915 MHz
x Signal reception intervals at 4 seconds
x Low battery indicator
x Table standing or wall mounting
Thermo-Hygro Transmitter
x Remote transmission of outdoor
temperature and humidity to wireless
forecast station by 915 MHz signals
x Alternate display of temperature and
humidity display
x Water-resistant casing
x Wall mounting case. (Mount in a sheltered
place. Avoid direct rain and sunshine
5
SETUP INSTRUCTIONS STEP BY STEP:
STEP 1:
x Remove battery cover from the wireless forecast station. Lift up and pull
out to remove the cover.
x Insert 2 NEW “C” batteries (not included) into the back of the wireless
forecast station. Observe the correct polarity (see marking inside the
battery compartment).
x The Wireless Forecast Station will light up and show, indoor
temperature, humidity and pressure.
x Do Not Mix Old and New Batteries
x Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
STEP 2:
x Ensure that the transmitter is within 10 feet of the wireless forecast
station.
x Remove battery cover from TX29UDTH-IT transmitter: Slide the battery
cover down and lift off the back.
x Insert 2 NEW AA batteries into the transmitter. Observe the correct
polarity.
6
x Within 3 minutes the Wireless forecast station will show readings in the
outdoor temperature area on the LCD.
x Note: Allow the Wireless forecast station and the transmitter to stay
within 10 feet of each other for the first 15 minutes of set up.
TROUBLE SHOOTING:
x If the wireless forecast station does not display the outdoor temperature
after 3 minutes, remove the batteries from both units and start the setup
process again.
x For optimal 915MHz signal reception, the outdoor transmitter should be
placed within 330 feet (100 meters) from the indoor Wireless forecast
station.
x The forecast icons on the Wireless forecast station require 48-60 hours
to synch with the barometric pressure, so immediate readings may not
be accurate.
SETUP WITH MULTIPLE TRANSMITTERS:
The wireless forecast station will accommodate up to three remote
outdoor transmitters (TX29UDTH-IT). The SNOOZE/CH button allows