Land Pride Backhoes BH2585 User Manual
Page 15
13
Section 1 Assembly and Set-Up
10/28/05
Land Pride
Lower Link Hitch Bracket Installation
1.
Install right hand (#2) and left hand (#1) lower link
hitch brackets with bolts (#3) flat washers (#5) and
lock nuts (#4). Assemble hitch pins (#7) to hitch
brackets as shown. Refer to Figure Figure 1-8.
2.
Back tractor against backhoe in mounting position.
3.
Connect tractor’s upper 3-point to backhoe.
4.
Apply hydraulic power to the backhoe.
Lower Hitch Brackets
Figure 1-8
19369
5.
Raise the boom to take the tension off of the boom
lock so you can release the lock. Refer to Figure 1-6.
6.
Remove the pin (#4) and connect dipper cylinder (#3),
re-install pin (#4), bolt (#1) & lock nut (#2). Refer to
Figure 1-7.
!
CAUTION!
Keep all people clear of your work area during the next steps.
Until the backhoe is securely mounted, the operator should
make sure that no portion of his body is beneath any part of the
backhoe.
Transport Lock
Transport Lock
Figure 1-6
20566
Dipper Cylinder
Installation
Figure 1-7
20569