LOREX Technology Color Wireless Surveillance System LW1000 - Manual (Page 12)

12
Wall Mounting Instructions (for the LW1010, LW1012, LW1020, LW1022 ONLY)
To mount the camera to a wall:
1. Loosen the screw located on the side of
the camera base using a slot head
screwdriver.
2. Pull the camera free from the Stand.
Mount the stand to the wall:
• Mark the position of the two
screw holes on the wall.
• Drill holes and insert the drywall plugs as
needed.
• Position the power cable through either slot
on the top or bottom of the stand as desired.
• Firmly attach the stand to the wall using the
provided screws.
1
2
3
NOTE: Do not allow the camera to come in contact
with other objects while it is detached from the stand,
as this may cause damage to the camera.