Logitech ClickSmart 310 - Manual (Page 6)

2
Getting Ready
1. Insert the four AAA alkaline batteries.
Note Removing the batteries while pictures
are stored in camera memory will erase
the pictures.
2. Insert wriststrap through wriststrap hook.
3. Install the Logitech ® camera software using
your computer’s CD-ROM drive. Follow the on-
screen instructions.
Taking Pictures and Videos
1. Press and hold the On/Select button for
one second to turn on the camera. The camera
is ready to take a digital picture.
2. To change any of the camera’s options
(e.g., camera mode, resolution, timer, etc.),
cycle through the options on the status display
by pressing the Mode button. The icon of
the active option will flash. Change it by pressing
the On/Select button.
3. When not in use, the camera turns itself off
after 30 seconds to conserve battery power.
4. To switch the camera off, press and hold the On/
Select button for two seconds.
Slide cover to open
Wriststrap hook