LG LSC 26905TT - Manual (Page 12)

12
Height Adjustment
When the tape is attached into the left leg, remove it(tape). Level the door by inserting flat
( - type) driver into the groove of the left height adjusting screw and rotating it clockwise .
When the tape is attached into the right leg, remove it carefully. Level the door by
inserting flat ( - type) driver into the groove of the right height adjusting screw and
rotating it clockwise .
The refrigerator doors will close smoothly by adjusting the height adjusting screw. If
the doors do not close correctly, performance may be affected.
If the freezer
compartment door
is lower than the
refrigerator
compartment door
If the freezer
compartment door
is higher than the
refrigerator
compartment door
After leveling the
door height
Installation
Next 1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Use this appliance on a
dedicated circuit.