Land Pride RTA1050 - Manual

136
Rotary Tillers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
311-252S continue on next page 5/10/11
26982
RTA10 Series
RTA1042 RTA1050 RTA1058
Recommended Tractor PTO HP 17 to 25 Horsepower (25 HP maximum)
Weight 358 lbs. 385 lbs. 415 lbs.
Tilling Width 42" 50" 58"
Overall Width 47 1/4" 55 1/4" 63 1/4"
3-Point Hitch Type Category l, Adjustable Lower Hitch Clevis with Plated Pins
Fits Land Pride Quick-Hitch
Offset Capabilities Yes, Cannot offset with Quick-Hitch
Sideshift Dimensions Centered
Shifted Right
Shifted Left
16” - 26”
16” - 26”
23” - 19” 25” - 25”
18” - 32”
32” - 18” 29” - 29”
22” - 36”
36” - 22”
Number of flanges 5 6 7
Number of Tines per Flange 4
Tine Construction Alloy steel heat treated “C” shaped blades
Skid Shoes Adjustable
Storage Stands Adjustable
Rear Deflector Adjustable profile stamped rear deflector
Driveline Category II
Off-Center Shear bolt - standard
Slip Clutch - optional
Gearbox Construction 25 HP input at 540rpm 1.5:1 ratio
Cast iron housing, straight bevel gears
Lubrication Gear Lube 80-90W EP
Capacity 2 pints
Drive Chain #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive Chain Lubrication Shell Alvania EP 00 or equivalent
Sprockets Case hardened teeth, splined bores
Rotor Swing Diameter 15"
Rotor Shaft Speed 225 rpm at 540 rpm PTO