Controls and features – Lincoln 1998 Continental User Manual

Page 31

Advertising
background image

provided in this mode. The air will be heated or cooled based on the
temperature selection. For added customer comfort, the air
distributed through the floor ducts will be slightly warmer than the air
sent to the instrument panel registers.

-Allows for maximum heating by distributing outside air through

the floor ducts. However, the air cannot be cooled below the outside
temperature because the air conditioning does not operate in this
mode.

-Distributes outside air through the windshield defroster ducts

and the floor ducts. Heating and air conditioning capabilities are
provided in this mode. The air will be heated or cooled based on the
temperature selection. For added customer comfort, the air
distributed through the floor ducts will be slightly warmer than the air
sent to the windshield defroster ducts. If the temperature is about
10°C (50°F) or higher, the air conditioner will automatically
dehumidify the air to prevent fogging.

• FRONT

-Distributes outside air through the windshield defroster

ducts. It can be used to clear ice or fog from the windshield. If the
outside air temperature is about 10°C (50°F) or higher, the air
conditioner will automatically dehumidify the air to prevent fogging.

• OFF-Outside air is shut out and the fan will not operate. For short

periods of time only, use this mode to prevent undesirable odors from
entering the vehicle.

Displaying outside temperature

Press EXT to display the outside air
temperature. It will be displayed
until EXT is pressed again.

If the selected temperature is changed while the outside temperature is
displayed, the new temperature will be displayed for four seconds after it
is changed, then the outside temperature will return to the window.

If a manual override function is selected while the outside temperature is
displayed, the new function will be displayed for four seconds after it is

EXT

OFF

AUTO

MAX

A/C

Controls and features

31

Advertising