Lindy 21515 - Manual (Page 5)

User Manual KVM Terminal LCD
9
LINE WRITE Test display
SCALE UP Don't care
FLT EDGE FLITER Adjust the image sharpness
MISC FUNC Adjust the image colour
OSD OSD ADJUST Set up OSD position and size
CONTRAST Sets the contrast of the display
BRIGHTNESS Sets the brightness of the display
EXIT EXIT Exit the menu and save
2-6 Horizontal Position
The item "H-Position" is used to adjust the horizontal image position.
A slider with current value is displayed. The range of the horizontal
position adjustment value is 0 to 250.
H - P O S I T I O N
0 125 250
2-7 Vertical Position
The item "V-Position" is used to adjust the vertical image position.
A slider with current value is displayed. The range of vertical
position adjustment value is 0 to 31.
V - P O S I T I O N
0 125 250
User Manual KVM Terminal LCD
10
2-8 Clock
The item "Clock” is used to adjust the number of clocks (pixels)
per line (sample per line). A slider with current value is displayed.
C L O C K
0 125 250
2-9 Phase
The item "Phase” is used to adjust the ADC sample pixel clock.
A slider with current value is displayed. The range of phase
adjustment value is 0 to 31 for 0 to 360 degrees.
PHASE
0 16 31
2-10 Auto Configuration
The main menu item "Auto config” is used to perform automatic
configuration of the phase, clock, colour, vertical and horizontal
position. Select sub-menu "Auto adjust” to adjust phase, clock,
colour and position. Select "Auto tracking" to adjust phase and
clock. Select "Auto position" to adjust horizontal and vertical
position. Select "Auto gain" to adjust colour.
AUTO CONFIGURATION
AUTO ADJUST
AUTO TRACKING
AUTO POSITION
AUTO GAIN
RETURN