Replacing tail lamp/brake/turn lamp bulbs, Lights – Lincoln 2010 Town Car User Manual

Page 50

Advertising
background image

Replacing HID low beam headlamp bulbs (if equipped)

The low beam headlamps on your vehicle use a “high intensity discharge”
source. These lamps operate at a high voltage. When the bulb is burned
out, the bulb and starter capsule assembly must be replaced by your
authorized dealer.

Replacing front parking lamp/turn signal/sidemarker bulbs

The front parking lamp/turn signal/sidemarker bulbs are located in the
headlamp assembly. Follow the same steps to replace these bulbs.

1. Make sure the headlamp switch is in the off position, then open the
hood.

2. Remove the retainers and the radiator cover.

3. Remove the bolts, then pull the headlamp assembly forward and
disconnect the electrical connector.

4. Rotate the bulb socket
counterclockwise and remove from
lamp assembly.

5. Carefully pull bulb straight out of
the socket and push in the new bulb
until it snaps, locking it into
position.

6. To complete installation, follow
the removal procedure in reverse
order.

Replacing tail lamp/brake/turn lamp bulbs

The tail lamp, the brake lamp and the turn signal lamp bulbs are located
in the tail lamp assembly. Follow the same steps to replace these bulbs.

Lights

50

2010 Town Car (tow)
Owners Guide, 1st Printing
USA
(fus)

Advertising