Lincoln Electric AC-225 - Manual (Page 2)

Fleetweld® 180 (6011)
7018AC
1/4” STEEL AND UP
T H E L I N C O L N E L E C T R I C C O M PA N Y
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
C U S T O M E R A S S I S T A N C E P O L I C Y
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed
their expectations guarantee such advice, and assumes no liability, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular
purpose, with respect to such information or ions. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information
in our possession at that time. Lincoln Electric is not in a position to warrant advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or
advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility
of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change — This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
GENERAL OPTIONS
Wheel Kit
Includes axle, two wheels, and
assembly hardware. Can be
installed in minutes.
Order K761
Carbon Arc Welding Torch
Increases versatility of the welder. Some
applications include: welding aluminum and
copper alloys, heating, bending and straight-
ening, brazing and soldering. Convenient
thumb control. Rated 100A at 40V.
Order K1876-1
Carbons
For use with Carbon Arc Welding Torch.
Order KP1905-1 for 1/4" Diameter.
Order KP1905-2 for 5/16" Diameter.
RECOMMENDED OPTIONS
A CLOSER LOOK
Important Safety Note:
This welder is not recommended in electrically hazardous conditions such as: damp locations, while wearing wet clothing, on metal
structures, or in cramped positions. Use a DC stick or wire welder.
1/16” TO 7/64” STEEL
1/8” TO 3/16” STEEL
3/32”
ELECTRODE
DIAMETER
3/32” - 1/8”
ELECTRODE
DIAMETER
1/8” - 5/32”
ELECTRODE
DIAMETER
Fleetweld® 37 (6013)
Fleetweld® 47 (7014)
7018AC
JET-LH® 78 (7018 H4R)
Fleetweld® 180 (6011)
Fleetweld® 37 (6013)
Fleetweld® 47 (7014)
7018AC
JET-LH® 78 (7018 H4R)
Fleetweld® 180 (6011)
Medium
Plate
Thickness
Heavy
Thick
STICK ELECTRODE SELECTION CHART