Laser DVBT-C30 - Manual (Page 17)

1 1
QuICk SeTup
There are two ways to setup the start the instillation wizard.
I. Press the [OK] button for 5 seconds
1) After pressing the [OK] button for 5 seconds,
the unit will be re-started and display the
message shown right.
2) Press the [VOL-] button to select “OK” item
3) The “Setup Wizard” will be shown.
4) Set the OSD Language, Region, Time Zone,
and then start the automatic search.
5) When all stations are detect the Setup Wizard
is complete.
II. Go to the main Menu -> System Setting -> Setup Wizard
1) Set the OSD Language, Region, Time Zone,
and then start the automatic search.
2) When all stations are detect the Setup Wizard
is complete.