Lennox Hearth X-TC - Manual (Page 66)

58 Bluetooth
Pair with a Device
To enable your phone to communicate with a
Bluetooth device, you need to "pair" the device
with your phone. The following instructions
describe the process. You may also need to
reference the user guide provided with your
Bluetooth device.
1. Prepare the Bluetooth device (accessory)
for pairing as described in the device’s
user guide.
2. From My devices , select Find new . Your
phone then searches and detects any
available Bluetooth devices in the vicinity.
You must enable the Bluetooth feature on
your phone.
3. At the device list, highlight a device and
select
Add .
Accept the pairing if prompted.
4. If necessary, enter the password provided
with the Bluetooth device and select
OK .
With the password accepted, the device appears
in your device list.
Use Bluetooth Devices
Connect to a Device
Before you can use Bluetooth, you must get
your phone ready to communicate with a
device, called “connecting.”
To connect your phone to a Bluetooth
device, from
My devices , highlight a device
and select Connect .
A notification appears confirming the connection.
You can now use the device with your phone.
Disconnect from a Device
From My devices , highlight a connected device
and select Disconnect .
Rename a Device
1. From My devices , highlight a device.
2. Select Options > Rename .
3. Enter a new name and select Save .
Delete a Device
You can delete a Bluetooth device that you have
paired your phone with.
1. From My devices , highlight a device.
2. Select Options > Delete > Yes .
View Device Services
A Bluetooth device paired with your phone may
have more than one service profile (such as
Headset, Handsfree, and so on). Do the following
to check the services available:
1. From My devices , highlight a device.
2. Select Options > Services .
3. At the service list, highlight a profile and
select
Connect to change the active profile.