Time setting on wireless display, Wireless outdoor sensor – La Crosse Technology Internet-Powered Weather Station WD-3209 User Manual

Page 10

Advertising
background image

Version 1.4 - 9/26/2008

Page 10 of 25

• Time and Date Set Automatically

• Low Battery Indicator on the LCD and the web site for the Wireless

Display and Outdoor Sensors

• Expansion

Options:

1. View Up To Five Forecast Locations on the Wireless Display
2. Receive Severe Weather Alerts

Time Setting on Wireless Display


The Time Zone you select
on

www.weatherdirect.com

for your Wireless Display is
intended to set the time for
your physical location so
the clock on your Wireless
Display is accurate. This
time is independent of your
selected forecast locations.
The Wireless Display will
ONLY display the time from
the “Time Zone for Wireless
Display Clock” set on the
web site, NOT the time at
the forecast locations.
There is only one Time
Zone available per Wireless
Display.

The Daylight Saving Time (DST) checkbox on your Wireless Display settings at

www.weatherdirect.com

is selected by default because most locations observe

DST. If you are in a location that does not observe DST, please make sure to
uncheck this box.

Wireless Outdoor Sensor


The Wireless Outdoor Sensor sends temperature data to your Wireless Display,
accurate to within a tenth of one degree.

The Outdoor Temperature Sensor uses 2 x “AA”,
Alkaline batteries. To install and replace the
batteries, please follow the steps below:

1. Remove the battery compartment cover on

the back of the sensor.

Advertising
This manual is related to the following products: