Lexmark X75 - Manual (Page 24)

20
Software installation appears incomplete
1
If you are using Windows 98, Windows Me, or Windows 2000 click
Start
Settings Control Panel. If you are using Windows XP,
click Start Control Panel Performance and Maintenance.
2 Double-click the System icon.
3
If you are using Windows 98 or Windows Me, click the Device
Manager tab. If you are using Windows 2000 or Windows XP, click
the Hardware tab, and then click the Device Manager button.
4 Look for the Other Devices category. If there are any Lexmark
devices found here, highlight them and press the Delete key.
Note: The Other Devices category appears only when
unknown devices are present. You should not delete any
Lexmark items unless they are present under the Other
Devices category.
5 Insert the CD and install the software again. Do not restart your
computer.
You software may not have been installed properly. Try the
following: