L-3 Communications X200xp - Manual (Page 8)

8
•
Handling & Precautions
⇒ All batteries can cause property damage or bodily injury if a
conductive material such as jewelry or keys touch exposed
terminals. Exercise care when placing batteries inside a
pocket, case, or other container with metal objects.
⇒ Do not replace batteries in a potentially explosive atmosphere,
such as a gas station or any place where you might normally
be advised to turn off your vehicle engine. Contact sparking
may occur and cause an explosion.
⇒ Do not remove power – removing batteries or disconnecting
optional external power supply – without first turning the
camera off using the on/off switch.
⇒ Do not permanently attach this camera to dynamic–mount
applications, such as on vehicles or heavy machinery, in which
transmitted vibration is continuously sustained.
⇒ Never point this camera directly into the sun, welding arcs, or
any other extreme intensity objects that you would not view
with your eyes. Doing so will damage the Camera.
•
Contacting L-3 Communications Infrared Products
The Customer Service Department is available to assist with questions
about this product. When you contact us, please have the following
information available:
- Camera Part Number -Camera Serial Number
[Part Number and Serial Number are located under the rear door/plug.]
L-3 Communications Infrared Products Customer Service Department:
800-990-3275 (US) or 972-528-1528 (Int’l)