Light & Motion HC3 - Manual (Page 10)

10
Rear Plate (Refer fig. 15)
On/Mode - Turns the camcorder on and cycles through modes.
Housing Left Side (Refer fig. 16 and 17)
Manual - Activates the camera’s manual button. Briefly pushing this button activates
manual control of the active function.You can change the active function by pushing
and holding the button until the menu of options appears on the display.
Camera Control Knob - Adjusts the function activated with the Manual button.
Easy - Press once to put most of the camera’s settings in automatic adjustment
mode. Press again to allow use of manual features.
P-Menu Selector - Allows partial access to the camera’s P-Menu. Rotate the knob
to position the internal selector over a button on the camera’s screen. Press the
selector knob in to contact the screen button on the camera’s touch screen.
(Fig. 14) (Fig. 15)
(Fig. 16) (Fig. 17)