System check and vehicle feature customization, Instrument cluster – Lincoln 2010 MKX User Manual

Page 21

Advertising
background image

System check and vehicle feature customization

Press SETUP repeatedly to cycle
the message center through the
following features:

PRESS RESET FOR SYS CHECK

For each of the monitored systems, the message center will indicate
either an OK message or a warning message for two to four seconds.

Press RESET to cycle through each of the systems being monitored.

The sequence of the system check report is as follows:

1. DOORS CLOSED

2. ENGINE TEMPERATURE

3. OIL PRESSURE

4. BRAKE FLUID LEVEL

5. WASHER FLUID LEVEL

6. FUEL LEVEL

7. DISTANCE TO EMPTY

UNITS

Displays the current units English or Metric.

Press RESET to change from English to Metric.

AUTOLAMP (SEC)

This feature keeps your headlights on for up to three minutes after the
ignition is switched off.

Press RESET to select the new Autolamp delay values of 0, 10, 20, 30,
60, 90, 120 or 180 seconds.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear, putting the vehicle in motion.

Press RESET to turn autolock on or off.

Instrument Cluster

21

2010 MKX (mkx)
Owners Guide, 2nd Printing
USA
(fus)

Advertising