Lindy 25044 User Manual

8 port gigabit desktop switch

Advertising
background image

8 Port Gigabit

Desktop Switch

User Manual

English

LINDY No. 25044

www.lindy.com

Introduction

Thank you for purchasing the LINDY 8 Port Gigabit

Desktop Switch. This high-performance network switch is

ideal for use in High Speed networks. Its small footprint

design means it can easily fit on your desktop without

taking up too much space.
All of the switch’s ports are capable of 10, 100 or

1000Mbps auto-negotiation, whilst its 10/100/1000Mbps

auto-sensing capability provides the easiest, most hassle-

free way to migrate from a Fast Ethernet to a Gigabit

Ethernet network.
This switch delivers a dedicated 10/100/1000Mbps

connection to every attached client with no bandwidth

congestion issues. It also supports auto MDI/MDI-X

functionality - each port can be used to connect to another

switch or hub without the need for crossover cables!
The switch uses store-and-forward architecture to filter

and forward data after each packet has been received

and examined to be free of errors. All ports support full

and half-duplex operation which doubles the network

bandwidth and allows the simultaneous transmission and

reception of data.
The switch provides 9kB Jumbo frame support which can

improve network performance by allowing more data to be

sent per transmitted frame.

For Commercial Use Only!

Tested to Comply with FCC Standards

Specifications

Standards: IEEE 802.3 10Base-T, 802.3u 100Base-

TX, 802.3ab 1000Base-T, 802.3x Full Duplex & Flow

Control

Ports: 8 x RJ45 10/100/1000Mbps Gigabit Ethernet

Auto MDI/MDI-X (Auto crossover)

Network speed: 10/100/1000Mbps & Full/Half-duplex

mode auto detection (1000Mbps Full duplex only)

Switching Architecture: Store and Forward

MAC Address Table: 8k MAC entries

Buffer Memory: 144kB

Nway Auto-negotiation: All ports

Dimensions: 155 x 85 x 27 mm (WxDxH)

Weight: 0.355kg

Power Supply: 12V DC, ~1A / 100…240VAC with

Multi Country Adapters (EUR, UK, US, AUS)

Operating Temperature: 10-45°C

Operating Humidity: 10-80% (Non-condensing)

Cable Requirements: Gigabit 1000Base-T requires

RJ45 STP/UTP, Cat. 5e or higher

Packing List

8 Port Gigabit Desktop Switch

External Switching Type Power Supply with Multi-

country adapters (EU, UK, US, AUS)

This user manual

LED Indicators

LED

Status

Operation

On

Power is on

POWER

Off

Power is off

Flashing

Port is transmitting or

receiving data

Link/Act

On

Connected but not

transmitting or receiving data

Advertising