LOREX Technology NETWORK READY H.264 HIGH PERFORMANCE DIGITAL VIDEO SURVEILLANCE RECORDER LH300 Series - Manual (Page 52)

38
Backup
Set start and stop times for recorded video
data you wish to copy to a connected USB flash
drive (not included).
NOTE: The system supports most brands of
USB flash drives from 128 MB ~ 8 GB.
Formatting the USB Drive
Prior to backing up data, you must first format
the USB flash drive so it will function properly
with the system.
To format the USB drive:
1. Connect a USB flash drive to the USB port
on the front panel on the system.
NOTE: Do not connect a USB flash drive to the
USB port on the rear panel. Only the port on the
front panel has been designed for backup data
transfer.
2. From the Main Menu, click . The
Backup menu opens.
3. Click Format.
4. Click Yes to format the hard disk or click
No to cancel.
Please allow a few moments for formatting to
take place and the system to reset.
To backup data:
1. Connect a formatted USB flash drive to the
USB port on the front panel.
NOTE: Do not connect a USB flash drive to the
USB port on the rear panel. Only the port on the
front panel has been designed for backup data
transfer.
2. From the Main Menu, click . The
Backup menu opens.
3. Click Start Time, and select the date,
month, year, and time to begin the backup.
Event Markers will appear in the Time Bar
as you scroll through the date and time.
4. Click Stop Time, and select the date,
month, year, and time to begin the backup.
NOTE: Event Markers will appear in the
Time Bar as you set through the Start and
Stop times.
5. Click Select Channel, and select a channel
for backup.
6. Click Save. Backup begins—the on-screen
counter displays the progress of the
transfer based on the selected start and
stop times.
7. To cancel Backup, right-click until you
return to the main screen. Please allow a
few moments for the system to exit.
NOTE: Backup may take several moments
depending on the size of data being transferred.
Figure 14.0 Backup menu
ATTENTION : Formatting erases all data
on the USB flash drive. This step cannot
be undone.
Figure 14.1 Confirm formatting