Line 6 BackTrack Series - Manual (Page 3)

White Light During Startup/Shutdown
While powering up, the status light will be white, as the BackTrack prepares to provide normal operations. The
status light will also be white during shutdown.
Flashing White Light When Busy
The status light will flash white when BackTrack is busy, and unable to perform other functions.
Purple Light
The printed Pilot’s Handbook says that the light will be continually purple when less than 5 minutes of memory
remains. This is incorrect: the light always flashes purple when memory is low.
Quit Features for BackTrack Setup Utility
The printed manual shows an image of the BackTrack Setup Utility that shows buttons for Quit Without Saving
and Save and Quit. These have been replaced by a single Quit button. When quitting, you will be asked whether
you want to save, if there are unsaved changes.
Version Display for BackTrack Setup Utility
The title bar of the BackTrack Setup Utility includes the version number of the utility software. Please note this
version, when contacting Customer Support with issues related to the software. The latest version of the
BackTrack Setup Utility is available at www.line6.com/software .
Audio Files Created by BackTrack
Files created by BackTrack will be named beginning with “BT”, followed by a 5 digit number, then “G” (if the
files was recorded from 1/4-inch guitar input) or M (if the audio was recorded from mic), then “.WAV”.
Storing Other Files on BackTrack
You can store other files on BackTrack, to transport them between computers. If you want to do this, we
recommend that you create a “MY FILES” folder at the top level “root directory” of BackTrack: the same location
that holds the MARKED and UNMARKED folders. Placed your other files in that folder. This will help ensure
that you don’t get these files confused with the files that BackTrack creates. No matter where you put files,
they should be ignored by BackTrack, and not deleted, etc. even if they are in the UNMARKED folder.
Update Firmware
The latest firmware is available for download from www.line6.com/software for installation using the Update
Firmware button. Download the firmware file, then click the Update Firmware button and locate that file using
the Open File window that is provided. Follow the onscreen instructions to complete the update.