Linksys PHONELINE ETHERNET BRIDGE HPB200 - Manual (Page 8)

Phoneline 10M Ethernet Bridge
Specifications
Standards IEEE 802.3, IEEE 802.3u, HPNA 1.0 and 2.0
Compatible
Protocol CSMA/CD
Ports 1 RJ-11 Standard Modular Telephone Port
2 10BaseT/100BaseTx RJ-45 Ports
(Includes One Shared Uplink)
Cabling Type Phoneline: Standard RJ-11 Telephone Cable
10BaseT: UTP Category 3 or better
100BaseTx: UTP Category 5 or better
Topology Star or Daisy Chain
Speed 1Mbps or 10Mbps (Phoneline)
Full Duplex: 20Mbps or 200Mbps
Half Duplex: 10Mbps or 100Mbps
LEDs Power
HPNA: Link,Tx,Rx
LAN: Link,Tx,Rx
Environmental Specifications
Dimensions: 7.31" x 6.16" x 1.88" (186mm x 154mm x 48mm)
Unit Weight: 12 oz. (0.34 kg)
Power Input: External, 5V DC, 3A
Certifications: FCC Class B, CE Mark Commercial
Operating Temp.: 32°F to 122°F (0°C to 49°C)
Storage Temp.: -4°F to 158°F (-20°C to 70°C)
Operating Humidity: 10% to 85% Non-condensing
Operating Humidity: 5% to 90% Non-condensing
11
Linksys HomeLink™ Series
Telephone Cabling
The telephone cables you use to build your HomeLink network can be either
crossover or straight-through cables. The connectors on phone cables are called
RJ-11 connectors, and have four wires inside the plastic tips.
Standard telephone cables like the ones you use every day in your home should
do the job.
10
Environmental Specifications