LST BEAMMMK - Manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED BEAM-ZBH_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
fi g. A
fi g. C
fi g. B
Refl ector BEAMLRK
• Suitable for Beam Smoke Detectors
Series 6500
• Three-part refl ector set increases the
detection range to 100m
• Multi-mount kit with
three-dimensional angle adaptation
• Surface-mount kit
The Refl ector BEAMLRK (fi g. A) increases the maxi-
mum range of the Beam Smoke Detector Series 6500
to 100m. The package contains 3 parts. These three
parts and the refl ector included with the detector are
put together, thus resulting in one large refl ector.
Specifi cations
Material Plastic
Dimensions W × H × D 200 Ч 230 Ч 10 (mm), one piece
Dimensions W × H 400 × 460 (mm), entire refl ector area
Order number 244024
Order name Refl ector/6500/75-100M BEAMLRK
Multi-Mount Kit BEAMMMK
The Multi-Mount Kit BEAMMMK (fi g. B) is used for atta-
ching the Beam Smoke Detector Series 6500 or the
refl ector under diffi cult conditions, e.g., if the ceiling is
sloped. If the refl ector is installed by means of the multi-
mount kit, the range is limited to 70m.
Specifi cations
Order number 244025
Order name Multi-Mount Kit/6500 BEAMMMK