Coaxial/toslink audio convertor, Introduction, Specifications – Lindy 70411 User Manual
Page 3: Operation
Coaxial/TosLink Audio Convertor
Introduction
Thank you for purchasing the LINDY TosLink/Coaxial audio convertor. This convertor
allows you to input digital audio through a Coaxial or optical port and output digital audio
through Coaxial or optical ports. With built in amplification, the convertor can extend the
signal to twice the cable length.
Specifications
• Input ports: 1 x TosLink (Optical Fibre) & 1 x Coaxial
• Output ports: 1 x TosLink (Optical Fibre) & 1 x Coaxial
• Power Supply: 5VDC 1A
• Dimensions: (WxDxH) 46 x 46 x 23.5mm
• Weight: 25g
• Housing: Plastic
• Colour: White
Operation
Side View
1. Optical/Coaxial switch: The switch determines which input is active
2. Power: Plug 5VDC PSU (included) into the unit and connect to a wall outlet
Front Panel
Rear Panel
1. Optical/Coaxial input: Connect your Optical/Coaxial audio equipment
2. Optical/Coaxial output: Connect to your Optical/Coaxial audio device input port
In Coax Optical
Out Optical Coax
2