Lennox Hearth SP5050 - Manual (Page 8)

6
Jabra JX0 Bluetooth headset
Redial last number*
• double-tap the answer/end button .
Adjust sound and volume
• Tap the volume up or down to adjust the volume .
• To mute, press both volume up and down at the same time .
a low beep alert plays during a muted call .
• To un-mute, tap either of the volume buttons .
Transfer a call
• Press the answer / end button to transfer the call from the
SP5050 to the mobile phone (or back to the Speakerphone)
Bring the SP5050 in night driving mode
• When the Speakerphone is on and in standby mode, you
press both the volume up and down button at the same time .
The light will then turn off . you can turn the lights back on with
another press . The Speakerphone will always power on with
the lights turned on .
* functions marked with * are dependent on your phone support-
ing these features . Check your phone’s user manual for further
information .
6 WhaT The lighTs mean
What you see What does it mean?
Power on is solid red The Jabra SP5050 is turned on
The connecting indicator
Blink twice every 2 second
The Jabra SP5050 is in
standby mode without being
connected to your phone
The connecting indicator is
blinking continuously
The Jabra SP5050 is in pairing
mode
The connecting indicator is
solid blue
The Jabra SP5050 is con-
nected to your mobile phone
The call status indicator is
solid blue
The call is in the Jabra SP5050
The battery status indicator
blinks every second
There is less than one hours of
talk time left