Lanier 5415 - Manual (Page 68)

Toner Empty Indicator
6 - 6 Service and Supplies
Toner Empty Indicator
The error indicator displayed here will appear when the toner
supply inside of the imaging cartridge has been depleted.
The machine will not be operable under these circumstances.
Follow the procedure provided below to replace the imaging
cartridge when this indicator is displayed.
Replacing the Imaging Cartridge
Note: Be careful not to touch the areas marked CAUTION: HOT, with bare
hands.
1
Pull the Lock Release Lever and fold
open the Upper Half of Machine.
2
Remove the imaging cartridge.
Note: The metal parts within the
machine are hot. Avoid placing your
hands in direct contact with the metal
fittings within the machine to avoid
injury.
Note: Be sure to properly dispose of
the Imaging Cartridge.
3
Remove the new imaging cartridge from
its protective packaging.