Laser AO-BTHD - Manual (Page 8)

AO-BTHD
USER MANUAL
8
D:
PAIRING AO-BTHD WITH MAC OS X 10 OR ABOVE
• Activate the headset pairing mode: hold the MFB (middle button) for 6 seconds - the
red and blue LED will blink alternately
• From the Setup Bluetooth Device in the Bluetooth status menu / menu bar, follow
the onscreen instructions to help pair your headset.
Note: If the Bluetooth status menu is not available, open Bluetooth Preference
and select the Show Bluetooth status in the menu bar checkbox.
• As part of the pairing process, you will enter a passkey 0000 (four zero’s)
• Open System Preferences and click Sound
• Click Output and select Bluetooth headset
• Click Input and select your headset. Adjust the Input and Output volume as needed
Note: Some applications, including iChat AV, allow you to select the audio device
from within the application (independently of the default audio input and output
selected on the Sound pane of System Preferences). To use a Bluetooth headset
within iChat AV, select the Bluetooth headset for audio input and output on the
Video pane of iChat preferences.
E:
PAIRING AO-BTHD WITH A SONY PLAYSTATION 3 ® (PS3)
Note – PS3 doesn’t allow you to listen to music/game/video content on a Bluetooth
headset – it’s only for online gaming chat
• Activate the headset pairing mode: hold the MFB (middle button) for 6 seconds - the
red and blue LED will blink alternately
• In the PS3 menu，go to the settings section，select accessory settings，then go to
Manage Bluetooth Devices. With your AO-BTHD in pairing mode, follow the
onscreen instructions and let the PS3 scan for your headset. When your headset is
found, follow the prompts and enter the pin-code 0000 (four zero’s). The pairing
should now be complete.
• More help can be found at:
http://community.us.playstation.com/thread/2344930?start=0&tstart=0