Lincoln Electric Idealarc DC -1000 - Manual

MIG, Flux-Cored, Submerged Arc, Gouging
Idealarc
®
DC-1000
If your application requires pure welding power combined with multi-
process flexibility, then the DC-1000, with 1300 amps of smooth DC
output, is your best investment.
Designed for semiautomatic and automatic welding, the precise control
of the DC-1000 delivers superior high amperage MIG, flux-cored,
submerged arc welding and air carbon arc gouging with up to
5/8" (15.9 mm) diameter carbons.
Publication E5.50 1/06
www.lincolnelectric.com
Processes
Advantage Lincoln
• 500 amp output connections provide enhanced arc characteristics for
low amperage submerged arc and MIG welding procedures.
• Single range control for precise output control and easy operation.
• Standard analog ammeter and analog voltmeter.
• Use the mode switch to select the desired output characteristics
for the process being used–CV Submerged Arc, CV Innershield ® ,
CC Submerged Arc.
• Power start/stop push button (NVR) switches with pilot light.
• Fuse protected 115V wire feeder auxiliary power with
1000 volt-amp capacity.
• Terminal strip and output studs for remote connections and cable.
• Low profile case allows installation of the DC-1000 under a workbench
and for stacking up to 2 machines to conserve floor space.
• Removable side panels for easy access to internal parts.
• Line voltage compensation maintains weld consistency, even with line
voltage changes of ±10%.
• Electronic and thermostatic protection from current overload and
excessive temperatures.
• Internal components, including windings, rectifiers and circuit
boards, are coated to protect against the effects of moisture
and corrosion.
• Recessed front panel protects operating controls.
• Three-year warranty on parts and labor.
• Seven-year warranty on the power rectifier.
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
MULTIPROCESS WELDERS
CV
CC
DC
60
Hz
3
PHASE
TECHNICAL SPECIFICATIONS
Dimensions Net
Product Product Input Rated Output Input Current Output H x W x D Weight
Name Number Power Current/Voltage/Duty Cycle @ Rated Output Range inches (mm) lbs. (kg)
DC-1000 K1386-3 230/460/3/60 1000A / 44V / 100% 193/96.5A 16-46 V 30.7 x 22.25 x 39.0 821 (372)
150-1300A (781 x 567 x 991)
K1387-3 220/380/440/3/50/60 193/112/96.5A
K1387-4 380/500/3/50/60 112/85A
K1387-6 415/3/50/60 102A
Output
Input
50
Hz