Land Pride Rotary Cutters RCR1872 - Manual

Rotary Cutters, Single Deck
Features and Benefits
Designs, specifications, features and information are subject to change without notice.
75
RCR1860 & RCR1872 Models
Features Benefits
Surpassed rugged
industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary
testing procedures specified by ANSI.
5 Year gearbox warranty Shows our confidence in the gearbox integrity.
Cat. 3 driveline
with shear-bolt Shear-bolt offers maximum driveline protection.
Cat. 3 driveline with
2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Dual position clevis type
3-point floating top link Permits deck to follow the terrain for an even cut. Additional set of holes for tractors
with shorter top links.
Lower clevis type
3-point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an
even pull from the tractor’s lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck construction Can withstand more abuse than lighter gauge decks.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Robotic welded. Adds additional strength.
Extended cutter front For increased material flow and added protection.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
7 1/4" Deck height on RCR1860
8 7/8" Deck height on RCR1872 Allows cutter to handle heavy cutting conditions.
1 1/2” to 13” RCR1860 Cutting height
1 1/2" to 11 1/2" RCR1872 Cutting height Provides for a wide range of cutting conditions.
Full length skid shoes Provides sidewall reinforcement and full protection to bottom of sidewall.
1/2” x 3” Heat-treated
free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
10 Gauge stump jumper Standard round stump jumper slides over stumps, rocks and debris.
High blade tip speed
RCR1860 = 16,360 FPM
RCR1872 = 14,853 FPM Ensures clean cut.
15”Laminated tailwheel Laminated material is long lasting in rough conditions.
4” x 16” Solid rubber tailwheel Can’t go flat.
Heavy-duty spindle
on tailwheel Tailwheels take a beating, 1 1/4” spindle gives the strength to protect tailwheel
assembly.
Guarding Protect against flying debris. Customer must choose to include chain or rubber on
the front and rear. Rear Metal Band standard.
312-849F 1/05/12