Lincoln Electric DC-650 PRO IM463-A - Manual (Page 7)

– 7 –
GENERAL DESCRIPTION
The DC-650 PRO is a multiprocess DC power source
designed for the GMAW (MIG), FCAW, SMAW (Stick),
and SAW (Sub-Arc) processes, with arc gouging
capability as well. It features an international
industrial rating of 700 amps, 44 volts at 100% duty
cycle. It also has a dual rating of 600 amps, 44 volts
at 100% duty cycle, in a 60
° C ambient temperature
environment.
Input
Voltage
Input Currents - 44 V Output
@ 600 A @ 700 A @ 750 A
208 V
230 V
460 V
575 V
130 A 146 A 153 A
117 A 132 A 139 A
59 A 66 A 69 A
47 A 53 A 56 A
INPUT SPECIFICATIONS
TECHNICAL SPECIFICATIONS
K1410 Multiprocess
DC Power
Source
60 Hz 700 Amps
44 Volts
100% Duty
Cycle
600 Amps
44 Volts
100% Duty
Cycle
Ordering
Information
Product
Description
Input
Frequency
Rated
Output
Additional
Output
Dimensions
& Weight
27.50 (1) x 22.25 x 38 in
(698 x 565 x 965 mm)
725 lbs
(330 kg)
OUTPUT SPECIFICATIONS
700 Amps
44 Volts
100%
Duty Cycle
750 Amps
44 Volts
60%
Duty Cycle
600 Amps
44 Volts
100%
Duty Cycle
750 Amps
44 Volts
35%
Duty Cycle
Two 115 Volts AC
15 Amps
One 42 Volts AC
10 Amps
GMAW 15-45
FCAW 15-60
SAW 10-60
SMAW 65-70 80-750 Amps
Rated Output
(DC)
At 40 ° C
Ambient
Temperature
Additional
Output Ratings
At 60 ° C
Ambient
Temperature
Auxiliary
Outputs
Open
Circuit
Voltage
Output
Current
Range
Efficiency
Power Factor (2)
@ 600A - 44V load:
Eff= 65% PF= .88
@ 700A - 44V load:
Eff= 66% PF= .90
@ 750A - 44V load:
Eff= 67% PF= .90
(1) Overall height 30.75 in (781 mm) including lift bale.
(2) Loaded readings are taken with a full auxiliary load. No load ratings are taken without auxiliary loads.
The DC-650 PRO is available from the factory in one
model only with a choice of input voltages. There are
no factory installed options.
12 A
11 A
6 A
5 A
1.5 kW
1.5 kW
1.5 kW
1.5 kW
Idle
Current
Idle
Power (2)