LG MPE-27 - Manual (Page 9)

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 9
PLACING GLOWING EMBERS
Remove the door ( refer to Figure 6 ) by grasp-
ing the door firmly at the bottom and support-
ing the top. Lift up and away.
Place the orange plastic glowing ember coals
along the back of the ember bed, behind and
below the logs. Refer to
Figures 13 and 14.
Reinstall the door. Catch all four tabs in the
slots located at the four corners of the unit
inside of the outer frame. Ensure the slots on
the tabs engage the face frame as the door
drops into place downwards.
Figure 13
Figure 14
Model Catalog Number Weight
MPE-27 H3428 78 lbs.
ACCESSORY PARTS AND COMPONENTS
FOR THE MPE-27
The accessory parts and components listed
on this page are to be used only with your
MPE-27 electric fireplace. Separate installa-
tion instructions are packaged with all ac-
cessories.
If you encounter any problems or have ques-
tions concerning the installation or applica-
tion of this system, please contact your dis-
tributor. For the name of your nearest dis-
tributor contact:
LENNOX HEARTH PRODUCTS
1110 West Taft Avenue
Orange, CA 92865
ACCESSORY COMPONENTS
The following items are available for use with
this appliance.
Cabinet Surround Kit, Mantel
- Painted White
H3431 SK-27W
- Honey Oak H3432 SK-27O
Touch-Up Paint Kit
Repair of minor scratches and discoloration of
the appliance's painted surfaces may be accom-
plished with the use of this touch-up paint kit.
Touch-Up Paint Kit (Gray) H5093 TPK-GR