Lenco Marine DVP-722 - Manual (Page 31)

Troubleshooting
Symptom Check
While in the input mode, no picture is
output from the external component
to the DVD player Check that the video or audio cable is securely connected.
Check that the DVD player is in the INPUT mode and in the DVD mode.
Check that the DVD player is turned on.
You cannot charge the battery pack with the player turned off.
A hot battery pack may take longer to charge.
Wait until the battery pack is sufficiently cooled down.
Battery pack won't charge
Charging LED indicator does not light Check with another fully charged pack if the LED lights.
Check that the AC adaptor is securely plugged in.
If DVD or battery pack is overheated, you will not be able to charge the battery pack.
Disconnect the AC adaptor and reconnect to make sure the connection is OK.
Use another battery pack, if the same symptom occurs, the AC adaptor may be defective.
If the second battery pack charges without any problem, your first battery pack may be
defective.
On charging the depleted battery,
the red and green LED charging
indicators quickly light, indicating
battery is fully charged, but in fact
it is not
529