Logitech Ultimate Ears 350 User Manual

Page 2

Advertising
background image

4

Wear the earphones

1. Gently insert the earphone (marked “R”)

in your right ear.

2. Gently insert the earphone marked “L” in

your left ear. Never remove an earphone

from your ear by pulling on its cable.

6

7

Use the remote

Headset controls are within easy reach:
1. Media control

• One click: Play/pause (audio source)
• One click: Call answer/hang up

(cellphone)

Refer to Step 3 for supported devices.

2. Volume control

Store and clean the earphones

1. To clean, remove the cushion and wipe

with a clean cloth.

2. Store by wrapping the cable around

your fingers.

3. Place the earphones inside the

protective case.

1

2

5

Troubleshooting

No sound/weak sound Make sure the 3.5 mm cable connector is

fully inserted into the headphone jack on your smartphone or tablet.

Adjust the volume control on the remote. Check the volume setting

in your media application. Use the smartphone adapter if low notes

(bass) and voice do not sound full, rich, and present or if background

sounds are not well mixed and they fade in and out.

The mic is not working. Make sure cable connections are secure and

mute is not active on your smartphone.

Weak bass Check the ear cushion seal. Try another ear cushion size.

Detached ear cushions Firmly attach the ear cushions to the

earphone port tubes.

Diminished sound quality Remove the ear cushions, check for

blockage in the port tube, and wipe with a clean cloth.

Hearing and Health is Critical!

Please review the safety guidelines in the Important

Information Document.

If you have more questions about your earphones,

visit www.logitech.com/support/UE350vm.

What do you think?

Please take a minute to tell us.

Thank you for purchasing our product.

www.logitech.com/ithink

www.logitech.com/support/UE350vm

United States

+1 646‑454‑3200

Use the garment clip

Hook the clip to the cable. Clip the cable to

your clothing to keep the cable in place.

Advertising