Lincoln Electric Mobiflex 200-M - Manual (Page 3)

Statiflex ™ 200-M
www.lincolnelectric.com [3]
RECOMMENDED OPTIONS
GENERAL OPTIONS
LTA 2.0 Telescopic Fume
Extraction Arm
Arm retracts from 1 meter (3 ft.) to
1.5 meters (4.5 ft.) and pivots 45°.
Optional Lamp Kit and Lamp Kit
with Arc Sensor available. Comes
with wall mounting bracket.
Order K1655-3
LFA 2.0 (6.5 ft.), LFA 3.1 (10 ft.)
and LFA 4.1 (13 ft.) Fume
Extraction Arms
Friction balanced extraction arm
with 360° rotatable hood, airflow
throttle valve and extraction focus
spoiler. Optional Lamp Kit and
Lamp Kit with Arc Sensor avail-
able.
Order
K1655-5 for LFA 2.0 (6.5 ft.)
K1655-1 for LFA 3.1 (10 ft.)
K1655-2 for LFA 4.1 (13 ft.)
LFA 4.1LC Low Ceiling
Extraction Arm
4.1 meter (13 ft.) spring balanced
low ceiling extraction arm with
360° rotatable hood, airflow
throttle valve and extraction focus
spoiler. Optional Lamp Kit and
Lamp Kit with Arc Sensor avail-
able. Ideal for facilities with ceil-
ings of 3.1 meters (10 ft.) or less.
Order K1655-6
Lamp Kit with Arc Sensor
Mounted in the lamp housing, the
arc sensor turns the fan on when
sensing the arc flash, and turns
off 20 seconds after the arc goes
out. Hood mounted switches turn
the unit on and off independently
of the arc sensor. Kit includes
lamp housing with arc sensor,
control box, interconnect wire,
hood mounted lamp/fan switch
and instruction manual.
Order
K1669-4 SF2400 Fan
K1669-10 SF4200 Fan
SF2400 Starter Overload
Switch for 115V
When a Lamp kit or Lamp Kit with
Arc Sensor is NOT used, this
overload switch retrofits the
extraction unit for 115V operation
of SF2400 Fan.
Order K1494-2
SF2400/SF4200 Starter
Overload Switch for 230V
When a Lamp Kit or Lamp Kit with
Arc Sensor is NOT used, this
overload switch retrofits the
extraction unit for 230V operation
of SF2400 Fan.
Order
K1494-3 SF2400 Fan
K1494-10 SF4200 Fan
230V Conversion Kit for
SF2400 Fan
Provides 230V operation of
SF2400 Fan when using Lamp Kit
or Lamp Kit with Arc Sensor.
Order K1750-1
SF2400 Fan
The 1HP, 115/1/60 fan has self-
cleaning concave blades and
provides an open air flow of 1200
CFM. Requires a mounting
bracket.
Order K1656-1
SF2400 Wall Mounting Bracket
Use K1657-1 wall mounting
bracket with LFA 3.1, LFA 4.1 or
LFA 4.1 LC. Use K1657-2 bracket
with LTA 2.0 telescopic extraction
arm, LFA 2.0 or EC 2 and EC 4
extension cranes.
Order
K1657-1 for LFA 3.1, 4.1, and
4.1 LC
K1657-2 for LTA 2.0, , LFA 2.0,
EC 2, and EC 4
SF4200 Fan
The 2 HP, 230/3/60 fan has self-
cleaning concave blades and
provides a minimum airflow of
1750 CFM. Includes mounting
bracket.
Order K1656-4
EC 2 (7 ft.) and EC 4 (14 ft.)
Extension Cranes
For large work areas, extend your
reach 2 meters (7 ft.) or 4 meters
(14 ft.). A side to side hinge has a
unique spring controlled lock to
hold the arm in place for steady
positioning. Each crane includes
support boom, mounting plate, 8"
tubing, flexible hose, and mount-
ing brackets.
Order
K1671-1 for EC 2
K1671-2 for EC 4
(Shown with SF2400 Fan)
(Shown with SF2400 Fan)
(Shown with SF2400 Fan)