Lincoln Electric LN-25 PRO IM901-A - Manual (Page 13)

A-6 INSTALLATION
LN-25™ PRO ACROSS THE ARC MODEL
A-6
ACROSS THE ARC SET-UPS
CC Power Sources with Output Terminals Always
Hot (See Figure A.5)
If the power source has a Remote/Local switch, place
the switch in the Local position.
Place the CV/CC switch in the feeder in the "CC" posi-
tion.
CV Power Sources with Stud Connectors and
Remote/Local Switch (See Figure A.6)
Place the power source Remote/Local switch in the
Local position.
Place CV/CC switch in the feeder in the "CV" position.
LN-25™ PRO (Across the Arc) CC Power Source Ranger 250, 250 LPG Ranger 305G, 305D Commander 300 Vantage 300, 400, 500 Air Vantage 500 Ranger 10,000 Ranger 3 phase SAE 400 with CV adapter Engine Driven welder with Wire Feed Module Work Electrode Work clip
LN-25™ PRO
(Across the Arc)
CC Power Source
Ranger 250, 250 LPG
Ranger 305G, 305D
Commander 300
Vantage 300, 400, 500
Air Vantage 500
Ranger 10,000
Ranger 3 phase
SAE 400 with CV adapter
Engine Driven welder with
Wire Feed Module
Work
Electrode
Work c lip
Work clip Work Electrode
CV-655 DC-400 DC-600 DC-655 V450-Pro LN-25™ PRO (Across the Arc)
Work clip
Work
Electrode
CV-655
DC-400
DC-600
DC-655
V450-Pro LN-25™ PRO
(Across the Arc)
FIGURE A.5
FIGURE A.6
K#
K2613-1
K2613-2
KP1695-XX
KP1696-XX
KP1697-XX
See Magnum Literature
K1803-1
Description
LN-25™ PRO
LN-25™ PRO Extra Torque
Drive Roll Kit
Welding Gun
CC power Source
Welding Cables
POWER SOURCE TO LN-25™ PRO
CAbLE CONNECTION DIAGRAMS
K#
K2613-1
K2613-2
KP1695-XX
KP1696-XX
KP1697-XX
See magnum Literature
K1803-1
Description
LN-25™ PRO
LN-25™ PRO Extra Torque
Drive Roll Kit
Welding Gun
CV power Source
Welding Cables