LG 26LX2D - Manual (Page 110)

110
Reference
G The remote control is a multi-brand or universal remote control. It can be programmed to operate most
remote-controllable devices of other manufacturers.
Note that the remote control may not control all models of other brands.
Programming the Remote Programming the Remote
TV INPUT TV/VIDEO
VOL
FLASHBK
CH
POWER
1 2 3
4 5 6
7 8
0
9
ADJUST RATIO SWAP TIMER
PIP CH+ PIP CH- PIP
SAP
CC M/C EJECT FREEZE AUTO DEMO
EZ PIC APM EZ SOUND
PIP INPUT
AUDIO
DAY -
CABLE
MENU
MUTE
PAGE
PAGE
FAV
TV GUIDE
VCR
DAY+
STB
EXIT
1394 MARK
TV
DVD
MODE
INFO
i
ENTER
Programming a code into a remote mode
Test your remote control.
To find out whether your remote control can operate the component
without programming, turn on the component such as a VCR and press
the corresponding MODE button (VCR) on the remote control, while
illuminating on the selected component. Test the POWER button to see
if the component responds properly. If not, the remote requires pro-
gramming to operate the device.
Turn on the component to be programmed, then press the correspond-
ing MODE button on the remote control.
Press the MENU and MUTE buttons simultaneously for 2 seconds, the
button selected component lights on the remote control. If you don't
press any button for 20 seconds, the button selected component will turn
off on the remote control. At a moment, you have to repeat from step 2.
Enter a code number using the number buttons on the remote. When
pressing the button, the light is blinked at a time. Programming code
numbers for the corresponding component can be found on the follow-
ing pages. Again, if the code is correct, the device will turn off.
Press the MENU button to store the code. After blinking twice, this code
is stored.
Test the remote control functions to see if the component responds
properly. If not, repeat from step 2.
1
2
3
4
5
6